Volume 54

Materials & Design

Volume 54

1

Effect of alumina particles loading on the mechanical properties of light-cured dental resin composites

Alsharif, Saad Omar, Bin Md Akil, Hazizan, Abbas Abd El-Aziz, Nasser, Arifin Bin Ahmad, Zainal

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 627 KB

english, 2014

2

Effect of ammonium polyphosphate on flame retardancy, thermal stability and mechanical properties of alkali treated kenaf fiber filled PLA biocomposites

Shukor, Faseha, Hassan, Azman, Saiful Islam, Md., Mokhtar, Munirah, Hasan, Mahbub

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 364 KB

english, 2014

3

Study of metallurgic and mechanical properties of laser welded heterogeneous joints between DP600 galvanised steel and aluminium 6082

Kouadri-David, A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.88 MB

english, 2014

4

Strength, microstructure and chemistry of ingot mould grey iron after different cycles of low frequency high temperature loads

Lan, Peng, Zhang, Jiaquan

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.14 MB

english, 2014

5

Effect of SiC nanoparticles on the mechanical properties of steel-based nanocomposite produced by accumulative roll bonding process

Jamaati, Roohollah, Toroghinejad, Mohammad Reza, Edris, Hossein

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.10 MB

english, 2014

6

Influence of strain state in mechanical behaviour of aluminium alloys using the Small Punch Test

Cuesta, I.I., Alegre, J.M., Lorenzo, M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 521 KB

english, 2014

7

A novel strategy for making poly(vinyl alcohol)/reduced graphite oxide nanocomposites by solvothermal reduction

Li, Jingjing, Shao, Leishan, Yuan, Lihua, Wang, Yinghan

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.59 MB

english, 2014

8

Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading

Berto, F., Lazzarin, P., Marangon, C.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.28 MB

english, 2014

9

Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres

Dong, Chensong, Davies, Ian J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.23 MB

english, 2014

10

Experimental and numerical study on the ballistic resistance of steel–fibre reinforced two-layer explosively welded plates

Zhou, Nan, Wang, Jinxiang, Peng, Chucai, Tong, Zongbao

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 815 KB

english, 2014

11

Influence of fabric structure and thickness on the ballistic impact behavior of Ultrahigh molecular weight polyethylene composite laminate

Zhang, Diantang, Sun, Ying, Chen, Li, Zhang, Sanliang, Pan, Ning

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.74 MB

english, 2014

12

Effect of grain refinement on mechanical properties and sliding wear resistance of extruded Sc-free 7042 aluminum alloy

Vasheghani Farahani, M., Emadoddin, E., Emamy, M., Honarbakhsh Raouf, A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.24 MB

english, 2014

13

Laser surface melting of a complex high alloy steel

Leech, Patrick W.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.08 MB

english, 2014

14

Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites

El-Kady, Omyma, Fathy, A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1006 KB

english, 2014

15

Design features for bobbin friction stir welding tools: Development of a conceptual model linking the underlying physics to the production process

Sued, M.K., Pons, D., Lavroff, J., Wong, E.H.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.35 MB

english, 2014

16

Investigating the effect of quench environment and deep cryogenic treatment on the wear behavior of AZ91

Amini, Kamran, Akhbarizadeh, Amin, Javadpour, Sirus

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.73 MB

english, 2014

17

Friction stir welding of thermoplastics using a newly designed tool

Pirizadeh, Mehdi, Azdast, Taher, Rash Ahmadi, Samrand, Mamaghani Shishavan, Sajjad, Bagheri, Arvin

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 788 KB

english, 2014

18

Hot tensile behavior of an extruded Al–Zn–Mg–Cu alloy in the solid and in the semi-solid state

Chen, Gang, Jiang, Jufu, Du, Zhiming, Han, Fei, Atkinson, H.V.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.86 MB

english, 2014

19

Prediction of transverse and angular distortions of gas tungsten arc bead-on-plate welding using artificial neural network

Tian, Liang, Luo, Yu, Wang, Yang, Wu, Xiao

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.07 MB

english, 2014

20

Mechanical behavior of hybrid steel-fiber self-consolidating concrete: Materials and structural aspects

Rambo, Dimas Alan Strauss, Silva, Flávio de Andrade, Toledo Filho, Romildo Dias

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.07 MB

english, 2014

21

Semi-analytically presenting the creep strain rate and quasi shear-lag model as well as finite element method prediction of creep debonding in short fiber composites

Monfared, Vahid, Mondali, Mehdi

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 568 KB

english, 2014

22

Microstructure and shear strength of sintered Cu–Al2O3 composite joined to Cu using Ag–Cu and Cu–Zn filler alloys

Leon-Patiño, Carlos A., Aguilar-Reyes, Ena A., Braulio-Sánchez, Mariano, Rodríguez-Ortiz, Gabriel, Bedolla-Becerril, E.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 926 KB

english, 2014

23

Influence of palm oil fuel ash on ultimate flexural and uniaxial tensile strength of green ultra-high performance fiber reinforced cementitious composites

Aldahdooh, M.A.A., Muhamad Bunnori, N., Megat Johari, M.A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 940 KB

english, 2014

24

Flexural and tensile moduli of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres

Dong, Chensong, Davies, Ian J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 924 KB

english, 2014

25

Compressive strength of high strength class C fly ash-based geopolymers with reactive granulated blast furnace slag aggregates designed by Taguchi method

Bagheri, Ali, Nazari, Ali

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.34 MB

english, 2014

26

Effect of post-weld heat treatment and electrolytic plasma processing on tungsten inert gas welded AISI 4140 alloy steel

Dewan, Mohammad W., Liang, Jiandong, Wahab, M.A., Okeil, Ayman M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.63 MB

english, 2014

27

Age hardening behaviors, mechanical and corrosion properties of deformed Mg–Mn–Sn sheets by pre-rolled treatment

Fang, Daqing, Ma, Ning, Cai, Kangle, Cai, Xuecheng, Chai, Yuesheng, Peng, Qiuming

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.19 MB

english, 2014

28

Effects of post-aging cooling condition on structure and tensile properties of aged Ti–7.5Mo alloy

Chen, Yen-Chun, Lin, Jiin-Huey Chern, Ju, Chien-Ping

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.34 MB

english, 2014

29

Microstructure, microhardness and corrosion susceptibility of friction stir welded AlMgSiCu alloy

Dong, Peng, Sun, Daqian, Wang, Bing, Zhang, Yueying, Li, Hongmei

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 743 KB

english, 2014

30

Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing

Akramifard, H.R., Shamanian, M., Sabbaghian, M., Esmailzadeh, M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.23 MB

english, 2014

31

Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior

Song, Bo, Dong, Shujuan, Liu, Qi, Liao, Hanlin, Coddet, Christian

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.30 MB

english, 2014

32

Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation

El Mehtedi, M., Musharavati, F., Spigarelli, S.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 606 KB

english, 2014

33

Aqueous corrosion performance of nanostructured bainitic steel

Kazum, O., Bobby Kannan, M., Beladi, H., Timokhina, I.B., Hodgson, P.D., Khoddam, S.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.53 MB

english, 2014

34

Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperatures

Kotkunde, Nitin, Krishnamurthy, Hansoge Nitin, Puranik, Pavan, Gupta, Amit Kumar, Singh, Swadesh Kumar

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.39 MB

english, 2014

35

Design of magnetorheological damper with a combination of shear and squeeze modes

Yazid, Izyan Iryani Mohd, Mazlan, Saiful Amri, Kikuchi, Takehito, Zamzuri, Hairi, Imaduddin, Fitrian

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.34 MB

english, 2014

36

Hydrogen-induced hardening of Ti–6Al–4V alloy in β phase field

Zhao, Jingwei, Ding, Hua, Jiang, Zhengyi, Huang, Mingli, Hou, Hongliang

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.36 MB

english, 2014

37

Constitutive modeling of deformation in high temperature of a forging 6005A aluminum alloy

Shi, L., Yang, H., Guo, L.G., Zhang, J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.65 MB

english, 2014

38

Mechanically improved and optically transparent polycarbonate/clay nanocomposites using phosphonium modified organoclay

Suin, Supratim, Maiti, Sandip, Shrivastava, Nilesh K., Khatua, B.B.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.79 MB

english, 2014

39

Mean damage parameter for the characterization of fatigue cracking behavior in bituminous mixes

Moreno-Navarro, F., Rubio-Gámez, M.C.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.72 MB

english, 2014

40

Constitutive equations with varying parameters for superplastic flow behavior of Al–Zn–Mg–Zr alloy

Guan, Zhiping, Ren, Mingwen, Zhao, Po, Ma, Pinkui, Wang, Qilong

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.68 MB

english, 2014

41

Effect of tempering temperature on the toughness of 9Cr–3W–3Co martensitic heat resistant steel

Yan, Peng, Liu, Zhengdong, Bao, Hansheng, Weng, Yuqing, Liu, Wei

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.59 MB

english, 2014

42

Structural and mechanical characterization of Al-based composite reinforced with heat treated Al2O3 particles

Hossein-Zadeh, Mohsen, Mirzaee, Omid, Saidi, Peyman

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.60 MB

english, 2014

43

Microstructure and characteristics of interpenetrating β-TCP/Mg–Zn–Mn composite fabricated by suction casting

Wang, X., Zhang, P., Dong, L.H., Ma, X.L., Li, J.T., Zheng, Y.F.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 887 KB

english, 2014

44

Designing tough and fracture resistant polypropylene/multi wall carbon nanotubes nanocomposites by controlling stereo-complexity and dispersion morphology

Das, Dibyendu, Satapathy, Bhabani K.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.08 MB

english, 2014

45

Multiaxial fatigue analysis of a metal flexible pipe

Rial, Djihad, Kebir, Hocine, Wintrebert, Eric, Roelandt, Jean-Marc

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.30 MB

english, 2014

46

Development of soft composite materials with improved impact resistance using Kevlar fabric and nano-silica based shear thickening fluid

Majumdar, Abhijit, Butola, Bhupendra Singh, Srivastava, Ankita

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.19 MB

english, 2014

47

Effect of joint design on ballistic performance of quenched and tempered steel welded joints

Balakrishnan, M., Balasubramanian, V., Madhusudhan Reddy, G.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.15 MB

english, 2014

48

Effect of fibre coating and geometry on the tensile properties of hybrid carbon nanotube coated carbon fibre reinforced composite

Shazed, M.A., Suraya, A.R., Rahmanian, S., Mohd Salleh, M.A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.71 MB

english, 2014

49

Effects of cooling method after intercritical heat treatment on microstructural characteristics and mechanical properties of as-cast high-strength low-alloy steel

Tao, Pan, Yu, Hao, Fan, Yongfei, Fu, Yu

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 7.14 MB

english, 2014

50

Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering

Fang, Sicong, Chen, Weiping, Fu, Zhiqiang

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.81 MB

english, 2014

51

Design, processing and characterization of flexible hybrid coatings: A comparative evaluation

Barletta, M., Pezzola, S., Puopolo, M., Tagliaferri, V., Vesco, S.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.58 MB

english, 2014

52

Effectiveness of amorphous silica encapsulation technology on welding fume particles and its impact on mechanical properties of welds

Wang, Jun, Wu, Chang-Yu, Franke, Gene

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.39 MB

english, 2014

53

Spot friction stir welding of low carbon steel plates preheated by high frequency induction

Sun, Y.F., Shen, J.M., Morisada, Y., Fujii, H.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.24 MB

english, 2014

54

Ductile fracture micro-mechanisms of high strength low alloy steels

Das, Arpan, Chowdhury, Tamshuk, Tarafder, Soumitra

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.88 MB

english, 2014

55

Effect of submicron size SiC particles on microstructure and mechanical properties of AZ31B magnesium matrix composites

Shen, M.J., Wang, X.J., Li, C.D., Zhang, M.F., Hu, X.S., Zheng, M.Y., Wu, K.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.62 MB

english, 2014

56

The mechanical properties and modeling of a sintered hollow sphere steel foam

Szyniszewski, S.T., Smith, B.H., Hajjar, J.F., Schafer, B.W., Arwade, S.R.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.16 MB

english, 2014

57

Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ–Morphological Chart–Analytic Hierarchy Process method

Mansor, M.R., Sapuan, S.M., Zainudin, E.S., Nuraini, A.A., Hambali, A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.41 MB

english, 2014

58

Studies on fatigue life enhancement of pre-fatigued spring steel specimens using laser shock peening

Ganesh, P., Sundar, R., Kumar, H., Kaul, R., Ranganathan, K., Hedaoo, P., Raghavendra, G., Anand Kumar, S., Tiwari, P., Nagpure, D.C., Bindra, K.S., Kukreja, L.M., Oak, S.M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.95 MB

english, 2014

59

Microstructure and abrasive wear characteristics of in situ vanadium carbide particulate-reinforced iron matrix composites

Zhong, Lisheng, Ye, Fangxia, Xu, Yunhua, Li, Jinshan

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.70 MB

english, 2014

60

Efficient computational modelling of carbon fibre reinforced laminated composite panels subjected to low velocity drop-weight impact

Farooq, Umar, Myler, Peter

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 5.25 MB

english, 2014

61

Hot deformation behavior of the 1.15C–4.00Cr–3.00V–6.00W–5.00Mo powder metallurgy high speed steel

Liu, Yanhui, Ning, Yongquan, Yao, Zekun, Fu, M.W.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 5.79 MB

english, 2014

62

Aluminum foam core density and geometry influences on the deformation mechanisms of foam filled braided tubular structures in tension

Audysho, Ramsin, Smith, Ryan, Altenhof, William, Patel, Krishna

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 6.39 MB

english, 2014

63

Axial crushing behavior and energy absorption efficiency of corrugated tubes

Eyvazian, Arameh, K. Habibi, Meisam, Hamouda, Abdel Magid, Hedayati, Reza

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.25 MB

english, 2014

64

Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering

Herranz, G., Romero, A., de Castro, V., Rodríguez, G.P.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.92 MB

english, 2014

65

The effect of repeated repair welding on mechanical and corrosion properties of stainless steel 316L

AghaAli, Iman, Farzam, Mansour, Golozar, Mohammad Ali, Danaee, Iman

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.55 MB

english, 2014

66

Tensile strength and failure simulation of simplified spot weld models

Khandoker, Noman, Takla, Monir

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.23 MB

english, 2014

67

Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloy

Shen, Zhikang, Yang, Xinqi, Yang, Shuo, Zhang, Zhaohua, Yin, Yuhuan

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 6.10 MB

english, 2014

68

Mechanical properties enhancement in Ti–29Nb–13Ta–4.6Zr alloy via heat treatment with no detrimental effect on its biocompatibility

Najdahmadi, A., Zarei-Hanzaki, A., Farghadani, E.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.48 MB

english, 2014

69

Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens

Ziemian, C.W., Sharma, M.M., Bouffard, B.D., Nissley, T., Eden, T.J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.59 MB

english, 2014

70

A tuning nano-precipitation approach for achieving enhanced strength and good ductility in Al alloys

Liu, C.H., Li, X.L., Wang, S.H., Chen, J.H., Teng, Q., Chen, J., Gu, Y.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.43 MB

english, 2014

71

Optimization of gas tungsten arc welding process by response surface methodology

Kiaee, N., Aghaie-Khafri, M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.09 MB

english, 2014

72

On friction stir butt welding of Al+12Si/10wt%TiC in situ composite

Yigezu, Belete Sirahbizu, Venkateswarlu, D., Mahapatra, M.M., Jha, P.K., Mandal, N.R.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.21 MB

english, 2014

73

Influence of laser dispersed treatment on rolling contact wear and fatigue behavior of railway wheel steel

Zeng, Dongfang, Lu, Liantao, Li, Zhengyang, Zhang, Jiwang, Jin, Xuesong, Zhu, Minhao

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.89 MB

english, 2014

74

Establishment and comparison of four constitutive models of 5A02 aluminium alloy in high-velocity forming process

Tian, Yi, Huang, Liang, Ma, Huijuan, Li, Jianjun

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.63 MB

english, 2014

75

Effect of rapid curing process on the properties of carbon fiber/epoxy composite fabricated using vacuum assisted resin infusion molding

Zhang, Kaomin, Gu, Yizhuo, li, Min, Zhang, Zuoguang

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.83 MB

english, 2014

76

Effect of strain hardening capability on plastic deformation behaviors of material during metal forming

Eom, J.G., Son, Y.H., Jeong, S.W., Ahn, S.T., Jang, S.M., Yoon, D.J., Joun, M.S.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 5.85 MB

english, 2014

77

Effect of boron content and welding current on the mechanical properties of electrical resistance spot welds in complex-phase steels

Kong, Jong Pan, Han, Tae Kyo, Chin, Kwang Geun, Park, Bong Gyu, Kang, Chung Yun

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.11 MB

english, 2014

78

Predicting the fatigue life of the SAE 1045 steel using an empirical Weibull-based model associated to acoustic emission parameters

Mohammad, M., Abdullah, S., Jamaludin, N., Innayatullah, O.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.07 MB

english, 2014

79

Increased room temperature formability of Mg AZ31 by high speed Friction Stir Processing

Hütsch, L.L., Hütsch, J., Herzberg, K., dos Santos, J.F., Huber, N.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.06 MB

english, 2014

80

Hydrothermal synthesis of ZrW2O8 nanorods and its application in ZrW2O8/Cu composites with controllable thermal expansion coefficients

Peng, Z., Sun, Y.Z., Peng, L.M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.56 MB

english, 2014

81

Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress

Hashemi, Ramin, Abrinia, Karen

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.04 MB

english, 2014

82

Comparing microstructure and mechanical properties of AISI D2 steel after bright hardening and oil quenching

Torkamani, H., Raygan, Sh., Rassizadehghani, J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.83 MB

english, 2014

83

Performance of aluminium/Terocore® hybrid structures in quasi-static three-point bending: Experimental and finite element analysis study

Rathnaweera, Gayan, Ruan, Dong, Hajj, Michael, Durandet, Yvonne

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 5.54 MB

english, 2014

84

Effects of heat treatment on oil palm shell coarse aggregates for high strength lightweight concrete

Yew, Ming Kun, Mahmud, Hilmi Bin, Ang, Bee Chin, Yew, Ming Chian

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 671 KB

english, 2014

85

Inside Front Cover (Editorial Board)

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 31 KB

english, 2014

86

Vacuum brazing of sapphire with Inconel 600 using Cu/Ni porous composite interlayer for gas pressure sensor application

Zaharinie, Tuan, Moshwan, Raza, Yusof, Farazila, Hamdi, M., Ariga, Tadashi

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.73 MB

english, 2014

87

Effects of heat treatment on mechanical properties of modified cast AISI D3 tool steel

Momeni, Mohammad, Kheirandish, Shahram, Saghafian, Hasan, Hedjazi, Jalal, Momeni, Mansour

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.67 MB

english, 2014

88

Joining of metal to plastic using friction lap welding

Liu, F.C., Liao, J., Nakata, K.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 5.37 MB

english, 2014

89

Modelling for randomly oriented multi material additive manufacturing component and its fabrication

Sugavaneswaran, M., Arumaikkannu, G.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.02 MB

english, 2014

90

Simulation and software design of continuous flexible roll bending process for three dimensional surface parts

Sui, Zhou, Cai, Zhongyi, Lan, Yingwu, Liu, Lin

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.18 MB

english, 2014

91

Fabrication and characterization of boron nitride bulk foam from borazine

Cao, Feng, Ding, Yang, Chen, Li, Chen, Chen, Fang, Zhenyu

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.25 MB

english, 2014

92

Analysis of the adhesive damage for different patch shapes in bonded composite repair of aircraft structures

Benyahia, F., Albedah, A., Bachir Bouiadjra, B.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.62 MB

english, 2014

93

Effect of impact force on Ti–10Mo alloy powder compaction by high velocity compaction technique

Khan, Dil Faraz, Yin, Haiqing, Li, He, Abideen, Zainul, Asadullah,, Qu, Xuanhui, Ellahi, Mujtaba

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.31 MB

english, 2014

94

Determination of flow stress and the critical strain for the onset of dynamic recrystallization using a hyperbolic tangent function

Solhjoo, Soheil

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 920 KB

english, 2014

95

An investigation on electroless Cu–P composite coatings with micro and nano-SiC particles

Faraji, Soheila, Faraji, Amir Hossein, Noori, Seyed Reza

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.32 MB

english, 2014

96

Improvement of yield strength of LM24 alloy

Zhang, Yijie, Ma, Naiheng, Wang, Haowei

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1004 KB

english, 2014

97

Microstructures and tensile properties of hot extruded Mg–5Li–3Al–2Zn–xRE(Rare Earths) alloys

Qu, Zhikun, Wu, Libin, Wu, Ruizhi, Zhang, Jinghuai, Zhang, Milin, Liu, Bin

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.19 MB

english, 2014

98

Behaviour of hybrid fibre reinforced concrete beam–column joints under reverse cyclic loads

Ganesan, N., Indira, P.V., Sabeena, M.V.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.45 MB

english, 2014

99

Joining of AlN and graphite disks using interlayer tapes by spark plasma sintering

Okuni, Tomoyuki, Miyamoto, Yoshinari, Abe, Hiroya, Naito, Makio

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.87 MB

english, 2014

100

Mechanical characterization of multiwalled carbon nanotubes-polycarbonate composites

Jindal, Prashant, Goyal, Meenakshi, Kumar, Navin

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.09 MB

english, 2014

101

The influence of fatigue on the stiffness and remaining static strength of self-piercing riveted aluminium joints

Li, Dezhi, Han, Li, Thornton, Martin, Shergold, Mike, Williams, Geraint

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.96 MB

english, 2014

102

Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels

Mandal, Durbadal, Ghosh, M., Pal, J., Ghosh Chowdhury, S., Das, G., Das, S.K., Ghosh, Sukomal

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.52 MB

english, 2014

103

Microstructure and mechanical properties of high-performance Mg–Y–Er–Zn extruded alloy

Zhang, Li, Zhang, Jinghuai, Leng, Zhe, Liu, Shujuan, Yang, Qiang, Wu, Ruizhi, Zhang, Milin

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.95 MB

english, 2014

104

Development of coir pith/nylon fabric/epoxy hybrid composites: Mechanical and ageing studies

Narendar, R., Priya Dasan, K., Nair, Muraleedharan

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.21 MB

english, 2014

105

An investigation on the tribological behavior of AZ91 and AZ91+3wt% RE magnesium alloys at elevated temperatures

Zafari, A., Ghasemi, H.M., Mahmudi, R.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.37 MB

english, 2014

106

Microstructural study and wear behavior of ductile iron surface alloyed by Inconel 617

Arabi Jeshvaghani, R., Jaberzadeh, M., Zohdi, H., Shamanian, M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.41 MB

english, 2014

107

Microstructure and mechanical properties of resistance spot welded dissimilar thickness DP780/DP600 dual-phase steel joints

Zhang, Hongqiang, Wei, Ajuan, Qiu, Xiaoming, Chen, Jianhe

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.83 MB

english, 2014

108

Brittle to ductile transition – An engineer’s point of view

Šmida, Tibor, Magula, Vladimír

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 338 KB

english, 2014

109

Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys

Gungor, Beytullah, Kaluc, Erdinc, Taban, Emel, SIK ŞŞ, Aydin

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.27 MB

english, 2014

110

Evaluation of strength, deformability and failure mode of composite structural insulated panels

Smakosz, Ł., Tejchman, J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.01 MB

english, 2014

111

Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition

Shah, Kamran, Haq, Izhar ul, Khan, Ashfaq, Shah, Shaukat Ali, Khan, Mushtaq, Pinkerton, Andrew J

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.32 MB

english, 2014

112

Dry sliding wear characteristics of rheocast Mg–Sn based alloys

Poddar, Palash, Das, Arpan, Sahoo, K.L.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.86 MB

english, 2014

113

Development of TiAl alloys with excellent mechanical properties and oxidation resistance

Kim, Seong-Woong, Hong, Jae Keun, Na, Young-Sang, Yeom, Jong-Taek, Kim, Seung Eon

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.03 MB

english, 2014

114

The ballistic performance of metal plates subjected to impact by blunt-nosed projectiles of different strength

Yunfei, Deng, Wei, Zhang, Guanghui, Qing, Gang, Wei, Yonggang, Yang, Peng, Hao

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.07 MB

english, 2014

115

Characterization and selection of optimal parameters to achieve the best tribological performance of the electrodeposited Cr nanocomposite coating

Yousefpour, M., Rahimi, A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.45 MB

english, 2014

116

Compliant flexural behaviour in laser sintered nylon structures: Experimental test and Finite Element Analysis – correlation

Munguia, J., Akande, S., Dalgarno, K.W.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.10 MB

english, 2014

117

Behaviour of fibre reinforced cementitious matrix strengthened concrete columns under eccentric compression loading

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.20 MB

english, 2014

118

A new TiCuHfSi bulk metallic glass with potential for biomedical applications

Wang, G., Fan, H.B., Huang, Y.J., Shen, J., Chen, Z.H.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 886 KB

english, 2014

119

Diffusion brazing of Ti–6Al–4V and austenitic stainless steel using silver-based interlayer

Soltani Tashi, R., Akbari Mousavi, S.A.A., Mazar Atabaki, M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.80 MB

english, 2014

120

Rotation friction pressing riveting of AZ31 magnesium alloy sheet

Duan, Hongyan, Han, Gaokun, Wang, Mingxing, Zhang, Xinglu, Liu, Zhongxia, Liu, Zhiyong

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.19 MB

english, 2014

121

Identification of design parameters influencing manufacture and properties of cold-bonded pond ash aggregate

Vasugi, V., Ramamurthy, K.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 5.54 MB

english, 2014

122

Analysis of the brazeability of W–W joints using a high temperature Ni-based alloy

Sánchez, M., Garrido, M.A., Múnez, C.J., Rams, J., Ureña, A.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.41 MB

english, 2014

123

A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169

Ren, X.D., Zhan, Q.B., Yuan, S.Q., Zhou, J.Z., Wang, Y., Ren, N.F., Sun, G.F., Zheng, L.M., Dai, F.Z., Yang, H.M., Dai, W.J.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.53 MB

english, 2014

124

Analysis of the mechanical response of a woven polymeric fabric with locally induced damage

Moezzi, Meysam, Ghane, Mohammad, Nicoletto, Gianni, Nedoushan, Reza Jafari

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.44 MB

english, 2014

125

Development of simplified active flux tungsten inert gas welding for deep penetration

Morisada, Yoshiaki, Fujii, Hidetoshi, Xukun, Ni

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.17 MB

english, 2014

126

The effect of different methods to add nitrogen to titanium alloys on the properties of titanium nitride clad layers

Lin, Yu-Chi, Chen, Han-Ming, Chen, Yong-Chwang

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 4.45 MB

english, 2014

127

Tensile properties of multilayer-connected biaxial weft knitted fabric reinforced composites for carbon fibers

Qi, Yexiong, Li, Jialu, Liu, Liangsen

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.18 MB

english, 2014

128

Effect of nanomodified polyester resin on hybrid sandwich laminates

Anbusagar, NRR., Giridharan, P.K., Palanikumar, K.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.92 MB

english, 2014

129

Experimental and simulation studies of springback in rubber forming using aluminium sheet straight flanging process

Chen, Lei, Chen, Huiqin, Guo, Weigang, Chen, Guojin, Wang, Qiaoyi

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.01 MB

english, 2014

130

Effects of thermal treatment on the mechanical properties of poly(p-phenylene benzobisoxazole) fiber reinforced phenolic resin composite materials

Bian, Liping, Xiao, Jiayu, Zeng, Jingcheng, Xing, Suli, Yin, Changping, Jia, Aiqing

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.35 MB

english, 2014

131

Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panels

Jen, Yi-Ming, Teng, Fu-Lung, Teng, Ta-Cheng

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.89 MB

english, 2014

132

Enhancement of dimple formability in sheet metals by 2-step forming

Kim, Minsoo, Bang, Sungsik, Lee, Hyungyil, Kim, Naksoo, Kim, Dongchoul

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.84 MB

english, 2014

133

Friction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performance

Goushegir, S.M., dos Santos, J.F., Amancio-Filho, S.T.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 3.58 MB

english, 2014

134

Design of optimum patch shape and size for bonded repair on damaged Carbon fibre reinforced polymer panels

Kashfuddoja, Mohammad, Ramji, M.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 2.20 MB

english, 2014

135

Analysis of the torsional strength of hardened splined shafts

Barsoum, I., Khan, F., Barsoum, Z.

Journal:

Materials & Design

Année:

2014

Langue:

english

Fichier:

PDF, 1.85 MB

english, 2014